manualshive.com logo in svg

SICK C4-RD, Руководство по эксплуатации

Поделиться
Скачать
SICK C4-RD Скачать руководство пользователя страница 6

1

About this document

1.1

Purpose of this document

These operating instructions contain information required during the life cycle of the
safety light curtain.

These operating instructions are available to all those who work with the safety light
curtain.

Please read these operating instructions carefully and make sure that you understand
the content fully before working with the safety light curtain.

1.2

Scope

These operating instructions only apply to the C4-RD safety light curtain with one of the
following type label entries in the “Operating Instructions” field:

•

8025642

This document is included with the following SICK part numbers (this document in all
available language versions):

8025642

1.3

Target groups of these operating instructions

Some chapters of these operating instructions are intended for certain target groups.
However, the entire operating instructions are relevant for intended use of the product.

Table 1: Target groups and selected chapters of these operating instructions

Target group

Chapters of these operating instructions

Project developers (planners, developers,
designers)

"Project planning", page 15
"Technical data", page 61
"Accessories", page 69

Installers

"Mounting", page 30

Electricians

"Electrical installation", page 44

Safety experts (such as CE authorized repre‐
sentatives, compliance officers, people who
test and approve the application)

"Project planning", page 15
"Commissioning", page 47
"Technical data", page 61
"Checklist for initial commissioning and com‐
missioning", page 76

Operators

"Operation", page 54
"Troubleshooting", page 57

Maintenance personnel

"Maintenance", page 55
"Troubleshooting", page 57

1.4

Additional information

www.sick.com

The following information is available on the Internet:

•

This document in other languages

•

Data sheets and application examples

•

CAD data and dimensional drawings

•

Certificates (e.g. EU declaration of conformity)

•

Guide for Safe Machinery Six steps to a safe machine

1 

ABOUT THIS DOCUMENT

6

O P E R A T I N G   I N S T R U C T I O N S | C4-RD

8025644/19Z2/2021-03-09 | SICK

Subject to change without notice

Содержание C4-RD

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды