manualshive.com logo in svg

SICK C4-RD, Руководство по эксплуатации

Поделиться
Скачать
SICK C4-RD Скачать руководство пользователя страница 55

9

Maintenance

9.1

Safety

DANGER

Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.

b

Do not do repair work on device components.

b

Do not make changes to or manipulate device components.

b

Apart from the procedures described in this document, the device components
must not be opened.

9.2

Regular cleaning

Overview

Depending on the ambient conditions of the safety light curtain, the front screens must
be cleaned regularly and in the event of contamination. Static charges can cause dust
particles to be attracted to the front screen.

Important information

DANGER

Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.

b

Regularly check the degree of contamination on all components based on the
application conditions.

b

Observe the information concerning test rod testing.

DANGER

Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.

b

Make sure that the optical properties of the front screens of the sender and
receiver are not changed, e.g., by:

°

beading water, mist, frost, or ice formation. If applicable, remove films or
other types of contamination, disconnect the voltage supply of the receiver
and then switch it back on.

°

Scratches or damage. Replace the device whose front screen is scratched or
damaged.

b

Make sure that all reflective surfaces and objects maintain a minimum distance
from the protective field.

b

Make sure that no dispersive media (e.g., dust, fog, or smoke) are within the
calculated minimum distance from the protective field.

MAINTENANCE 

9

8025644/19Z2/2021-03-09 | SICK

O P E R A T I N G   I N S T R U C T I O N S | C4-RD

55

Subject to change without notice

Содержание C4-RD

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды