background image

3

D-Sub HD, 15-pin

4

M12, 17-pin

5

M12, 12-pin

2.

Connect the CDF600-22xx to a 24 V power supply.

3.

Set the rotary encoding switch found on the side of the CDF600-22xx to "2".

To connect using open-ended cables and connection terminals:
1.

Connect the pins according to the table below.

Pin on TriSpectorP1000
(Power I/O connector)

Pin on CDF600-2200
(DEVICE connector)

Connection type

Pin 11

Pin 2

Serial (RX to TX)

Pin 12

Pin 3

Serial (TX to RX)

Pin 2

Pin 5

GND to GND

Pin 1

Pin 1

24 V to 24 V (optional)

1

1

The 24 V to 24 V connection allows the TriSpectorP1000 to be powered by the CDF600-22xx.

2.

Set the rotary encoding switch found on the side of the CDF600-22xx to "2".

Further information

For information about configuration and operation of the CDF600-22xx, see the
CDF600-2xxx product page

www.sick.com/CDF600-2

. The following information is

available there:

Technical information

Function blocks (including documentation) for sending strings to and from the
CDF600-22xx using Profinet and Profibus

ANNEX 

12

8022395/19OK/2020-12 | SICK

O P E R A T I N G   I N S T R U C T I O N S | TriSpectorP1000

49

Subject to change without notice

Содержание 1091318























































Отзывы: