User’s Manual 11
The bottom status bar displays some information on the system status.
The operating mode (
2a
) is controlled by the lockable selector.
The system status
(2b)
displays part of the information on page
S.01
(status information), which is useful
for the operator, as it can be displayed also if other pages are being viewed and in other display modes.
In some pages, pressing the
SHIFT
button replaces the bottom status bar for the time the button is
held down with a
HELP
message. If the message is unavailable, the bar is cleared and restored when the
button is released.
WARNING: assigning incorrect value to one or more parameters can cause
malfunctions, damage to things and/or injury to people. The parameters must only be
changed by qualified personnel. Parameters can be protected by password (see par. Access
codes).
This mode lets you display and change the programming parameters.
Each programming parameter has a 3-digit numeric code (ex. P.101) to identify the variables
regardless of the language used.
The first line under the top status bar identifies the current menu with the menu number and the
relevant text.
A pair of numbers are displayed on the right in this line. The first indicates which entry in the menu is
selected or which page is displayed, the seconds indicates how many entries or pages can be
displayed in the current menu/submenu.
Access to the programming mode can be controlled by 4 different PASSWORD levels, which are listed
in order of priority.
1. SICES password
2. Manufacturer password
3. Installer password
4. User password
2a
2
b
2a - Operating mode
2b - System status
OFF |Engine stopped -
Fig. 5 - Bottom status bar
