SICE Tech Why Evo 6.3, Дублирование процедур

Страница: 3 / 14

3
6.3
1. While pressing the button 1 of the “WHY EVO”, at the same time press 4 times the 2 button.
2. Release both buttons. Now the WHY EVO WHITE LED emits a short flash every 2 seconds.
3. Place the original remote control to be programmed in front of the “WHY EVO”, at about 5 cm of distance (as shown in
the picture).
4. Press and retain pressed the button of the original remote control and wait for a change flash (as a faster flash) of
WHY EVO WHITE LED and a change of its color (BLUE) that confirms the correct learning of code. This step may take a few
seconds and during that the color LED is WHITE.
5. While the BLUE LED is flashing, press the button of the “WHY EVO” where you want to program the code just learnt, and
retain pressed until the LED switches off and an extended sound “BEEP” for a reconfirmation of the correct code learning.
This step may take some seconds.
6. The copy has been happened with success. Now check on the automation the correct
functioning of the new WHY EVO remote control.
Notes:
• If the WHITE LED flashes only 3 times (of WHITE color) and switches off, the code has not learnt correctly. Please repeat
the operation from the step 1.
• The WHY EVO memory is completely re-writable.
• To duplicate further buttons of WHY EVO, please repeat the operation from the step 1.
FIXED CODE
DUPLICATING PROCEDURES
BEST POSITION FOR THE
DUPLICATION
licorice black
cod. 4791010
magnolia white
cod. 4791011
granade red
cod. 4791012
sky blue
cod. 4791013
5 cm
IT IS RECOMMENDED:
TO REALIZE A CORRECT DUPLICATION OF THE REMOTE CONTROLS, WE RECOMMEND TO
FOLLOW THE PROCEDURES HERE BELOW TAKING CARE TO DISTANCE YOURSELF BY TOOL
THAT CAN GENERATE FREQUENCY TROUBLES AS:
CORDLESS
WI-FI VIDEO SURVEILLANCE DEVICES
MOBILE PHONES, SMARTPHONES OR TABLETS
WI-FI OR BLUETOOTH ACTIVED IN YOUR COMPUTERS
ELECTRONIC MOTOR
NEON LIGHTS
WIRLESS DEVICES FOR BACK END MANAGEMENT IN THE BUSINESS STORES