REPAIR
Symptom
Reason
Solution
The device
does not
work
No power supply
Make sure the device is
plugged in properly and the
wall outlet is working normally
The fuse has blown.
Replace the fuse
The device
makes a lot
of noise
The device is not parallel
to the ground. The
appliance is too close to
the wall or the interior
accessories of the
refrigerator are placed
incorrectly.
Stabilize the base of the
refrigerator by adjusting the
position of the feet. Move the
device away from the wall.
Correctly place the interior
accessories of the refrigerator.
The
appliance
does not
reach the
desired
temperature.
The door is opened too
often or has been left
open for a long time.
Close the door and do not open it
too frequently.
The refrigerator is too
close to the wall.
Move the unit away from the
wall to ensure proper.
The refrigerator is too
full.
Remove food from the appliance.
The temperature is
incorrectly regulated.
Turn the thermostat knob to
position “3” or higher.
The device
emits bad
odors.
Food has expired inside
the refrigerator.
Throw away expired foods
and wrap other foods.
The interior of the
appliance needs to be
cleaned.
Clean the inside of the appliance.
If your device shows other symptoms than those described above,
please call the authorized service center of the store or the dealer.
The following symptoms are not failures:
1. The sound of coolant flowing through the pipes can be heard, this is normal.
2. Moisture on the exterior surface of the unit during wet seasons is not a
problem, just wipe the surfaces with a soft, dry cloth.
3. The compressor and condenser may heat up more during periods of high
heat.
4. The door frame is a little warm, it means the condenser is working to remove
moisture from the air.
EN -
2
3
Содержание OT 11010 BL
Страница 77: ......