10. Manual Recording
8.
UPnP
9. NAT
11. Playback
“Online” status means connecting the device successfully and you will
see the live image. You may select the added device and click button to
modify channel, IP address, ect.
Delete
Edit
Display Password
IP Camera Name
IP Address
Model
Edit IP Camera
XXX
192
.
168
.
1
. 58
9008
admin
XXX
Port
Username
Protocol
Password
IP Channel 5
OK
Test
Cancel
1
2
192.168.1.20
IP Channel 4
192.168.1.38
IP Channel 3
XXX
9008
XXX
Online
XXX
Offline
XXX
9008
Remain Bandwidth: 85 / 120 Mb
No.
Camera Name
IP Address
Port
Protocol
Model
Preview
Status
Edit Camera
Edit Camera Group
Search Camera
3
192.168.1.45
IP Channel 5
XXX
Online
XXX
9008
►
WAN
①
Set the network of the NVR. Go to Start
→
Settings
→
Network
→
TCP
/
IPv4.
Input static IP address or enable PPPoE and then input the user name and password
received from your ISP.
②
Go to Start
→
Settings
→
Camera. Click “Add Camera” or behind the
column of the search camera and select “Manually Add” to add the IP cameras.
Input IP address, server port, username and password of the IP camera. The IP
camera must be connected over WAN. And here the IP address of the IP camera
must be a WAN IP address.
►
NAT Settings
①
The NVR shall be powered on and connected to the network.
②
Go to Start
→
Settings
→
Network
→
TCP
/
IPv4. You can obtain the IP
address, subnet mask and gateway automatically. You can also manually enter
them according to the actual network situation. Please make sure the network
segment is the same as that of the network which is used.
③
Set
the
preferred
or
alternative
DNS
Server
.
Click “Apply”
to
save
the
parameters.
④
Go
to Start
→
Settings
→
Network
→
NAT tab. Enable NAT and select
the NAT Server (The default NAT Server is
nat.autonat.com
). Click
“Apply” to save the parameters.
TCP
/
IPv4
Port
UPnP
NAT
DDNS
Network Status
nat.autonat.com
NAT Server
Enable
Apply
►
NAT Access
After finishing the NAT settings, you can input
http://www.autonat.com/n9000
in the IE address bar and then press enter to go to the following interface. If
you are the first time to access the NAT, you shall download and install the
ActiveX according to the popup tips. After installing ActiveX successfully,
it will pop the login box.
Before recording, please install and format a HDD. In the live interface
you can see the menu toolbar. Click
button
to start
recording
.
Click
it
again
to
stop
recording
.
You
can
also click
to check the status of
the recording.
►
Instant playback
Click “Instant Playback” in the right-click menu of the camera’s preview
window to select or drag the playback progress bar to change the playback
time to play back the record.
►
General playback
Click
on the tool bar at the bottom of the live preview interface or click
Start
→
Playback to go to the playback interface as shown below. You can
also
add the playback cameras manually. Click
in the playback window to pop
up the “Add Camera” window. Check
the cameras in the window and then click
“Add” to add playback camera. The record files of the added playback camera
will be played in the playback interface.
You can use the UPnP function to enable the fast connection of the device to
WAN via a router without port mapping.
①
Go to Start
→
Settings
→
Network
→
UPnP,
and enable UPnP and then
click “Apply” button to save.
②
Enable the UPnP function in the router.
③
Click “Refresh” button to refresh the UPnP status. If the UPnP status were
still “Invalid UPnP” after refreshing it for several times, the port would be wrong.
Please change the mapping type to “Manual” and then click to modify the
port until the UPnP status turns to “valid UPnP”.
HTTP Port
Server Port
80
6036
80
183.17.254.19
Valid UPnP
Valid UPnP
Invalid UPnP
6036
183.17.254.19
Port Type
External Port
External Address
UPnP Status
Edit
Port
RTSP Port
554
554
TCP
/
IPv4
Port
UPnP
DDNS
NAT
Network Status
Auto
Map Type
UPnP
NAT
Enable
Refresh
Apply
450041000798 A0
Device Serial Number
: Click on the menu bar at the bottom of the live
interface to check the serial number or go to Start
→
Settings
→
Network
→
Network Status to check the serial number of the NVR).
User Name
: The username of the NVR. The default username is admin.
Password
: The password of the NVR. The password is set by yourself when
you configure the wizard for the first time.
Enter Password
Enter Password
Enter device serial number
Login
