Misuse might cause electric shock, generation of heat, fire, or rupturing, which will
result in burns, injury or blindness.
Do not subject this product to strong impact or drop it.
If an abnormality occurs during operation, immediately stop operation and remove the
cause of the abnormality. If the abnormality is judged to be caused by this product,
contact your Sibata distributor. Do not use this product in an abnormal state or allow it to
be dismantled for repair by non-service personnel.
Do not run this product wrapped in a cloth or bedding, or enclosed in a box.
Avoid using it in environments subject to flammable gases, sea air, or other corrosive gases.
Do not wash this product with water.
Do not clean this product by a dry cloth or duster. Doing so might cause static electricity
and result in an explosion. Clean with a moist cloth or similar item.
Do not use paint thinner, alcohol, or other organic solvents for cleaning this product.
This product is made for indoor use. Do not use it in environments that may be exposed
to wind and rain.
Do not use the BU-24L in combination with other types of batteries (such as the BU-24B).
When connecting this product to its special charger (BC-100B battery charger), do not force
the connection if it is not connected well. It may result in reversed connection between
positive and negative sides, which can cause malfunctions and accidents.
Misuse might cause moderate injury or physical damage.
Install this product on a horizontal, stable site.
When not using this product for a long time, store the BU-24L as an individual unit, in as
cool and dry a location as possible out of the direct sunlight. Storing the BU-24L units
connected together to each other might cause battery degradation.
Do not place heavy objects or get on this product. Doing so might cause the product to
tip over or deform the product, resulting in accident or malfunction.
Take care not to nip your fingers when assembling the product, for example, when
installing the BU-24L.
The operating temperature range of the BU-24L is 10 to 40
°
C. Use of this product
outside of this range might impair the BU-24L's performance and service life, resulting in
damage or deformation of the battery.
If the BU-24L will not be used for an extended period, charge it once every three months
to prevent excessive discharge.
Do not connect 2 units of BU-24L each other which has big difference of remaining
power. Doing so might degrade BU-24L.
The BU-24L has power life. If power becomes short, change to new BU-24L.
■
Names of Parts
Twist lock
Receiving fixture (Twist lock)
Charging confirmation
lamp
Cable connector
Handle
