1.Features
Strong Zinc Alloy Electroplated anti-vandal case
Very low power consumption,standby current less than 80mA
Backlight keys
Card transmission format : Wg26
RS485,RS232 optional
Keypad transmission format: 4bit
Built-in Buzzer
Doorbell button can offer independent operation of any doorbell system
2.Specifications
Operating Voltage
9-16V DC
Card type
EM,Mifare
Reading Distance
3-6 cm
Communication Distance
100M
Idle Current
<80mA
Operating Temperature
-45℃
～
60℃
Operating Humidity
10%- 90% RH
Waterproof
Conforms to IP68
Dimension
120*80*25 MM
3.Installation
Remove the back cover from the keypad using the supplied special screw driver
Drill 2 holes on the wall for the Self tapping screws and I hole for the cable
Put the supplied rubber bungs to into the two holes
Fix the back cover firmly on the wall with 2 Self tapping screws
Thread the cable through the cable hole,
connect the wire needed, wrap unused wire with insulating
tape in case of short circuit
Attach the keypad to the back cover.
