siat SM446 HS, Инструкция по эксплуатации и список запасных частей

Страница: 40 / 102

ENGLISH
April 2013 40
12 - MACHINE USE
12.1 OPERATOR CORRECT WORKING POSITION
12.2 MACHINE STARTING
- Close the side safety guards
- Release the E-stops
- Give air to the circuit
- Turn the main switch in ON position
- Press the AUXILIARIES button
- Press the RESET button
- Press the START button
12.3 PRODUCTION STARTING
- Before starting, check the main functions of the machine.
1 Entry air pressure 6 BAR, if pressure is below 5,5 the machine functions are not safe.
2 Centering device pressure: 2,5÷3,5 BAR
3 Side drive belts pressure: 2,3÷3,5 BAR
4 Box height pick up pressure: suggested working pressure: 0,5÷1 BAR
5 Press the START button and check that machine stops if E-stops are pressed.
6 Press the START button and check that machine stops if side guards are opened.
12.4 TAPE REPLACEMENT
Operator skill 1
Each time it is necessary to replace the tape roll, do as follows:
- Press the E-stop;
- Set the main switch in OFF position;
- Open the safety guard
- Do all the operations under points 11.1 and 11.2
Pay attention to the cutting blades.