siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 95 / 104

IDM 510-140-0
Control system
93
English language Operation and maintenance manual
Press button D to move reel holder carriage to the start of the cycle (lower part).
– Double mode: the wrapping stops automatically with the reel holder carriage at
the upper side of the load.
– Insert the covering sheet.
– Press key B .
– The machine completes the wrapping cycle and stops automatically with the reel
holder carriage at the lower side of the load.
10. Manually cut the film and cause it to adhere to the wrapped product.
Important
Keep the reel suitably refilled to prevent to avoid interrupting the wrapping
due to absence of film.
11. Remove the wrapped product to be able to load the next one to wrap.
12. Correctly load the new product to be wrapped in the middle of rotating platform.
– With a product having the same features, press button B to start the wrapping
cycle.
– Wrapping is carried out in the same modes.
▀
Normal stop
– Make sure that the wrapping process has been completed.
– DO NOT control a machine stop if the wrapping cycle has not been com-
pleted.
– Manually cut the film and cause it to adhere to the wrapped product.
– Remove the wrapped product.
– Rotate electric selector G to position “O” (OFF).