e015x DA15Kx
User guide (v.02)
pag.5
Printed in
e015-di DA15K [Eng].docx
Siap+Micros S.r.l.
Layout connection plugin DA9000 datalogger
PINOUT COM1
2 - RX
3 - TX
5 - GND
7 - RTS
8 - CTS
PINOUT COM4
1 - DCD
2 - RX
3 - TX
4 - DTR
5 - GND
6 - DSR
7 - RTS
8 - CTS
9 - RI
The case of the data processing electronic includes:
•
One USB Type A port for connection via USB cable to a PC or terminal and with which you can
access folder inside the data logger through application "
ActiveSync”.
•
Two USB type B port for connecting peripherals such as keyboard, mouse PenDrive.
•
One UTP port for connecting to a local network of Ethernet protocol
•
Two D
– SUB type connectors with 9 male-pin for connecting serial devices such as modems, PC,
sensors and other equipment with RS232 interface.
•
One multifunction 28-pin connector for connecting respectively:
o
One multifunction 28-pin connector for connecting respectively.
o
Three pins for serial RS485 in order to connect serial devices such as modems, PC, sensors
and other equipment with RS485 interface.
o
One pin for the watchdog output (internally connected to the power supply control system).
o
Four pins for four digital open collector outputs with 100
Ω limiting resistor.
o
Four pins for four optically isolated digital inputs.
o
One pin for a separate ground for optoisolated inputs.
o
Two pins for ground connections.
o
Three pins for the CAN
– BUS port, for connecting devices with CAN – BUS.
o
Three pins for the SDI
– 12 port for connecting devices with SDI – 12 protocol