SI Solo/Pro 2, Руководство по установке, Страница: 58 / 64

52
Troubleshooting
TROUBLESHOOTING
Solo/Pro 2 is 100% programmed and tested at the
factory. In case of a malfunction please use the
troubleshooting guide table.
Possible Cause Solution Symptom
Screen
won't run
Check for power at
your plug and/ check
for breaker box.
Material has
shifted at the
weight bar
An intermediate
stop was set for
the motor
Gently move the
material out to each
end of the weight bar
until smooth.
Call SI Customer
Support to fix at
512.832.6939, Opt. 1
No power to 24v
DC supply
Vertical
wrinkles in
screen
When down
button is
pressed,
screen stops
halfway
Dimples in
screen
Debris rolled up
in screen material
Clean material per
instructions on Pg 30.