www.sitech.se
We want to congratulate you on your purchase of a Modular Quick Change
Solution developed and manufactured by SI TECH in Sweden. Our products
enhance your capacities through increased comfort and safety. All of our pro-
ducts are made in Sweden and used worldwide by the full spectrum of divers.
Quick Cuff turns your drysuit into a modular platform able of carrying a variety of
different seals as well as the possibility of changing a torn or broken seal in minutes
without tools or glue. It is also fully compatible with the Quick Glove System and the
Glove Lock QCP system.
Note
that the Wrist Ring has to be glued onto the suit.
This manual does not address the topic of gluing/attaching the Wrist Ring of the
Quick Cuff to your drysuit. Please visit: www.sitech.se for information.
1.1
Carry the seal through the Stiff Ring and
invert the rear section of the seal to the outside
of the Stiff Ring. Position the rear end of the
seal as the illustration shows.
Seal position:
The red, dotted line indicates
the final position of latex seals. The blue, dotted
line indicates the final position of silicone seals.
NOTE:
The seal must be placed evenly around the
Stiff Ring – no bumps or gaps.
Seal
Stiff
Ring
A tips for mounting of latex seals:
The latex seal can be secured with flexible tape
before insertion into the Wrist Ring, to prevent
the seal from sliding. Make sure the seal covers
the locking groove.
Cut out section of assembly shows
how the the components shall
be aligned when assembled correct.
A.
Wrist Ring
B.
Stiff Ring
C.
Final position of latex
seal (if used)
D.
Safety flange of
silicone seal (if used)
SEAL MUST BE USED
AT ALL TIMES
• Turns your drysuit into a modular platform
capable of carrying a variety of different seals
and Dry Glove systems.
• Provides the opportunity of changing a torn
or broken seal in minutes without tools or glue.
The system itself consists of
three components per arm:
• Wrist Rings
• Stiff Rings
• Wrist Seals (silicone or latex)
Wrist Ring
Stiff Ring
