SI Analytics UviLine 8100, Руководство по эксплуатации

Страница: 123 / 236

General 123
3 General
3.1 Technical Data
Technical Specifications UviLine 8100 UviLine 9100 UviLine 9400
Wavelength range 320-1100 nm 320-1100 nm 190-1100 nm
Technique single beam single beam single beam
Light Source
(Duration)
Halogen
(approx. 500h)
Halogen
(approx. 500h)
Xenon
(lifelong)
Display QVGA QVGA QVGA
Optical solution 6 nm 4 nm 4 nm
Data storage
  
Methods 100 methods; unlimited
with external data storage
100 methods; unlimited with
external data storage
100 methods; unlimited with
external data storage
Interfaces 2 x USB and RS232 2 x USB and RS232 2 x USB and RS232
Cell changer –
 
Sipper –
 
Peltier –
 
Absorbance/Transmission
  
Concentration
  
Spectra scanning
  
Kinetics
  
Multi wavelength
  
Center height cuvette 8.5mm 8.5mm 8.5mm
Recom. Slit size >2mm >2mm >2mm
3.2 About navigation inside the user’s manual
In this operating manual, the introductory navigation steps leading to individual menus or dialogs are
clearly shown in a gray box. The box indicates a section of the menu tree.
Starting point of the description is always the main menu, which can be reached with the
<HOME> key
from any operating situation. From there navigation takes place downward.
The following example shows the elements of the menu tree with the relevant operating steps:
Other possibilities of navigation:
•
The <ESC> key moves the operator one level up in the menu tree.
•
The <HOME> key directly calls up the main menu.
Remark
If the operator is "lost" in a menu, he has to press <HOME> key and restart navigating from the main
menu.
Bold letters and angle brackets indicate a
key on the photometer (except function
keys).
- Press the
<Home> key.
The main menu is called up.
Square brackets indicate a function key F1 to
F4. The text between the brackets corresponds
to the assignment according to the function key
menu on the bottom edge of the display.
- Press the function key with the assignment i.e.
[Setup].
The corresponding menu appears.
<HOME>
– [Configuration]
- Langague
Text without square brackets indicates a
menu item indicated on the display (list
item).
- Select the menu item with the arrow keys
«
▲ » and « ▼ ». The current selection is
displayed in reverse video.
- Then press
<START·ENTER> .