4
NETWORKS
GS800
LED Behavior
Caution and Warnings
•
Supply the appropriate DC power to the equipment. Incorrect DC power settings can
damage the equipment and may cause injury to the user.
•
Do not use the power adapter with DC output voltage higher than 57V in case of a
PoE board.
•
Make sure there is enough clearance around GS800 to allow air circulation.
•
For freestanding installation, the surface should be smooth and leveled. Attach
rubber to each corner on the bottom GS800.
•
Ensure that there is no direct exposure to heat or sunlight.
LED/BUTTON COLOR
STATUS
DESCRIPTION
PWR
Green
On
Indicates GS800 is receiving power
and is functioning properly.
Off
GS800 is not powered-up.
SYS
Green
On
GS800 is up and working.
ALM
Red
On
There is some problem such as the
fans are not working, hardware/
software errors, or others.
1G/ACT
Green
On
The corresponding port has 1 Gbps
connection.
10/100M/ACT
Yellow
On
The corresponding port has 10/100
Mbps connection.
POE/DUPLEX
Green
On
The corresponding port has POE enable
(for POE switch)
The corresponding port is in Full Duplex
mode (for NON POE switch)
Содержание GS800 Series
Страница 2: ......