Seite 24 von 34
First remove the bracket from the back of the device
as follows:
1. Place the front of the device on a stable
surface.
2. Unscrew the upper screws by using a
screwdriver and set them aside.
3. First press the tabs together and pull the
holder out of the device at the top and then at
the bottom.
Then assemble the wall bracket following
instructions:
5. Hold the bracket against the wall and mark the
drill holes. Make sure that the wall bracket is
correctly positioned - LASH WITH HOLE UP.
6. Then drill the marked holes.
7. Then press the supplied dowels into the holes.
8. Now attach the wall bracket using the supplied
screws.
You can now mount the panel on the wall as follows:
9. First hang up the panel below
10. Then push it into the tabs at the top.
Now screw in the two upper screws that you
removed earlier to secure the panel.
