Seite
19
von
22
SAFETY MEASURMENTS
The SHX fan heater is equipped with protective devices that protect the device and are
designed to prevent a fire.
Please note that neither mechanism is an auto stop or other comfort function. Always switch
the device off, pull out the mains plug and wait until the heater cools down before you move,
clean or store the device.
OVERHEAT PROTECTION
If there is any risk of overheating (e.g. when device is covered) the overheat protection switches off
the device.
As soon as the device cooled down it turns back on automatically and continues operating as before.
A common cause of overheating are deposits of dust or lint in the device. Therefore, clean
the device regularly and remove these deposits with a vacuum cleaner.
TIP-PROTECTION
As soon as the device is tilted a few degrees from its vertical position, if you lift the device or
accidentally knock it over, the anti-tip device releases and the device switches off.
CLEANING INSTRUCTIONS
Before cleaning the device, turn it off, unplug it and allow it to cool down.
Cleaning the casing:
Clean the device by wiping it with a soft, damp cloth and afterwards wipe it dry.
Cleaning the air filter
The air filter is located on the back of the device - we recommend cleaning it after every week
of operation.
To do this, press the tab down and remove the grille. Then remove the filter to be able to clean
it. Use a vacuum cleaner to remove the dust collected in the filter and grille. If the filter is very
dirty, you can immerse it in warm water and rinse it several times.
After washing, let the filter dry well before returning it to the device.
Do not dip the device in water or splash it with any other liquid.
Do not use gasoline, alcohol or solvents for cleaning the device.
Do not spray insecticides or similar means on the device.
Do not use the device in rooms with high humidity.
DO NOT COVER THE DEVICE
– RISK OF FIRE!
