SHX SHX20HLBF2002F, Руководство пользователя

Страница: 20 / 23

Seite 20 von 23
Waterdrain
SAFETY MEASURMENTS
The SHX fan heater is equipped with protective devices that protect the device and are
designed to prevent a fire.
Please note that neither mechanism is an auto stop or other comfort function. Always switch
the device off, pull out the mains plug and wait until the heater cools down before you move,
clean or store the device.
OVERHEATING PROTECTION
If there is any risk of overheating (e.g. cover of the device, mains overload ... ..), the built-in
overheating protection switches the device off.
As soon as the device cools down, the device automatically switches on and continues as
before.
WARNING
A common cause of overheating are deposits of dust or lint in the device. Therefore, clean
the device regularly and remove these deposits with a vacuum cleaner.
TIP PROTECTION
As soon as the device is tilted a few degrees from its vertical position, if you lift the device or
accidentally knock it over, the anti-tip device releases and the device switches off.
CLEANING
Before cleaning the device, switch off the heater, pull out the mains plug and then wait
until the device has completely cooled down.
Cleaning the casing:

Clean the device by wiping it with a soft, damp cloth and afterwards wipe it dry.
WARNING

Do not dip the device in water or splash it with any other liquid.

Do not use gasoline, alcohol or solvents for cleaning the device.

Do not spray insecticides or similar means on the device.

Do not use the device in rooms with high humidity.

Do not cover the device
– risk of fire!
Cleaning the water tank:
PLEASE NOTE:
THE WATER TANK MUST BE CLEANED AFTER USING IT 3 DAYS.
1. Take the water tank out of the device and clean it with lukewarm water.
2. Before you put the water tank back into the device, make sure that it is
completely dry.
3. To drain the water, open the water drain (see photo) and put a container
Under it. Now let all the remaining water run out.