Shuttle SX58H7, Руководство пользователя

Страница: 21 / 64

6
English
Latch
Latch
Cutout
Notch
DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Be sure to
install DDR3 DIMMs on this motherboard. Follow the steps below to correctly install
your memory modules in the memory sockets.
. Unlock the DIMM latch.
2. Align the memory module's cutout with the DIMM slot notch.
Slide the memory module into the DIMM slot.

2.3.2 Installing a Memory
Make sure to unplug the power supply before adding or removing DIMMs or other
system components. Failure to do so may cause severe damage to both the moth-
erboard and the components.
A DDR3 memory module has a cutout, so it can only fit in one direction.
Repeat to install additional memory modules if required.
3. Check that the latches are closed, and
the memory module is firmly installed.
48*2=96 pin 72*2=144 pin
DDR3
240-pin 1.5V