- 30 -
2
(Default)
CPU Host Frequency Setting (J8)
The default CPU host frequency setting is 66MHz. It is defined according to
Intel Celeron CPU specification. We strongly advise novice users not to
modify the original setting of the CPU host frequency, for setting an incor-
rect value may damage your CPU.
For experienced users, the ME17/ME18 mainboard provides an alternative
Hard-Configure function to adjust your CPU host frequency manually.
Note:
Before you adjust your CPU host frequency by jumper, you need to
set CPU Host/PCI Clock to
default
in frequency/voltage control of
BIOS setup program.
Insert mini-jumper caps properly on J8 to reach desired CPU Host
Frequency, as shown in the following table.
J8- (1, 2)
J8- (3, 4)
J8- (5, 6)
J8-(7, 8)
MHz
Power On Default
OFF
OFF
OFF
OFF
66MHz
66MHz
ON
OFF
OFF
OFF
70MHz
ON
ON
ON
ON
75MHz
ON
ON
ON
OFF
83MHz
Note:
75, 83 MHz are for over-clock usage only. However, over-
clocking is not a recommended practice.
Содержание Spacewalker ME17
