Shuttle Spacewalker AE14, Руководство пользователя

Страница: 42 / 85

- 40 -
HDD LED Connector (IDE LED)
Attach the connector cable from the IDE
device LED to the 2-pin HDD LED header.
The HDD LED lights up whenever an IDE
device is active.
Hardware Reset Connector (RST)
Attach the 2-pin hardware reset switch
cable to the RST header. Pressing the
reset switch causes the system to restart.
Speaker Connector (SPK)
Attach the PC speaker cable from the case
to the 4-pin speaker connector (SPK).
EPMI Connector (EPMI)
Hardware System Management Interface
(EPMI) header may attach to a 2-pin mo-
mentary switch. Press the EPMI switch
to force the system into power savings
mode; press again to resume normal op-
eration.
23
24
25
26