- 63 -
Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO
mode (0-4) for each of the four IDE devices that the onboard IDE inter-
face supports. Modes 0 through 4 provide successively increased
performance. In Auto mode, the system automatically determines the
best mode for each device.
"
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4.
Primary/Secondary Master/Slave UDMA
Ultra DMA/100 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver
(Windows 95 OSR2 or a third-party IDE bus master driver). If both of
your hard drive and your system software support Ultra DMA/100,
select Auto to enable BIOS support.
"
The choice: Auto or Disabled.
OnChip PCI Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
OnChip AC97 Audio
Enables and disables the onboard audio chip. Disable this item if you
are going to install a PCI audio add-in card.
"
The Choice: Auto or Disabled.
VIA-3068 MC97 Modem
This item allows you to control the onboard MC 97 Modem.
"
The Choice: Auto or Disabled.
Super IO Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
POWER ON Function
Enables computer power on by keyboard, mouse, or hotkey activity.
"
The Choice: Password, Hot KEY, Mouse Move, Mouse Click, Any
KEY, BUTTON ONLY, or Keyboard 98.
KB Power ON Password
Enables you to set a password to be entered when using the keyboard
to power on the computer.
