- 30 -
#
#
#
#
#
Jumpers
Clear PS/2 Keyboard Power on Password (J7)
J7 is used to clear PS/2 keyboard power on password. Clearing the J7 will
result in erasing the password you set previously and then user may power
on your system without any secret code.
Pin 2-3 (Clear Password)
Pin 1-2 (Default)
Step 1.
Turn off the system power (PC-> Off).
Step 2.
Remove ATX Power cable from ATX Power connector.
Step 3.
Remove jumper cap from J7 pins 1-2.
Step 4.
Place the jumper cap on J7 pin 2-3 for a few seconds.
Step 5.
Return the jumper cap to pin 1-2.
Step 6.
Plug ATX Power cable into ATX Power connector.
Step 7.
Turn on the system power (PC-> On).
Clear CMOS Setting (J2)
J2 is used to clear CMOS data. Clearing CMOS will result in permanently the
erasing previous system configuration settings and the restoring original
(factory-set) system settings.
Pin 1-2 (Default)
Pin 2-3 (Clear CMOS)
Step 1.
Turn off the system power (PC-> Off)
Step 2.
Remove ATX Power cable from ATX Power connector.
Step 3.
Remove mini jumpers from J2 pins 1-2
Step 4.
Place the mini jumpers on J2 pin 2-3 for a few seconds
Step 5.
Return the mini jumpers to pin 1-2
Step 6.
Plug ATX Power cable into ATX Power connector.
Step 7.
Turn on the system power (PC-> On)
A1
A2
1
1
1
1
J7
1
J2
1
