Shuttle HOT-675V, Руководство пользователя

Страница: 42 / 50

- 42 -
Primary Master/Slave UDMA
On this mainboard, VIA Chipset improves IDE transfer rate using Bus Master UltraDMA/
33 IDE which can handle data transfer up to 33MB/sec. The options are
Disabled,
Enabled and Auto, Auto is the default settings for on board Primary Master / Slave
UltraDMA33 .
Note : Your hard drive must also support UDMA for this feature to work.
Secondary Master/Slave UDMA
On this mainboard, VIA Chipset improves IDE transfer rate using Bus Master UltraDMA/
33 IDE which can handle data transfer up to 33MB/sec. The options are
Disabled,
Enabled and Auto, Auto is the default settings for on board Secondary Master/Slave
UltraDMA33 .
Note : Your hard drive must also support UDMA for this feature to work.
Initial Display First
This item is used to determine initial device when system power on. The options are PCI
and AGP .
POWER ON Function
This item is used to defined Keyboard & PS/2 mouse power-on function enabled or
disabled. The options are Button Only , HOT-Key and PS/2 Mouse .
Button Only - Only soft-on/off button on the front panel is available.
Hot-Key
- Power-on by soft-on/off button and keyboard are available. The user may
set power-on hot-key from <Ctrl><F1> to <Ctrl><F12>.
PS/2 Mouse - Powre-on by soft-on/off button and PS/2 Mouse are available.
Note:1. When item of PS/2 Mouse or HOT-Key is selected, please also adjust jumper
JP2 to the proper position.
2. USB keyboard, USB Mouse and Serial Mouse are not supported to this
function.
KB Power ON Function
This item to set the Keyboard power-on password.
Hot Key Power ON
Power-on by soft-on/off button and keyboard are available.
KBC Input Clock
This item to set the input clock to onboard keyboard controller. The options are 8MHz and
12MHz .
Onboard FDC Control
This item specifies onboard floppy disk drive controller. This setting allows you to
connect your floppy disk drives to the onboard floppy connector. Choose the "
Disabled "
settings if you have a separate control card.