- 67 -
to turn on your system.
Ø
The choice: Enabled, Disabled.
Month Alarm
This is for specifying the alarm month which system will awaken
the system from suspend mode.
Ø
The choice: NA, 1 ~ 12.
Day of Month Alarm
This item selects the alarm date.
Ø
Key in a DEC number: Min=0, Max=31.
Time (hh : mm : ss) Alarm
This item selects the alarm Time.
Ø
[hh] Key in a DEC number: Min=0, Max=23.
Ø
[mm/ss] Key in a DEC number: Min=0, Max=59.
** Reload Global Timer Events **
Global Timer (power management) Events are I/O events whose occur-
rence can prevent the system from entering a power saving mode or can
awaken the system from such as a mode. In effect, the system remains
alert for anything that occurs to a device that is configured as Enabled,
even when the system is in a power-down mode.
Primary/Secondary IDE
When these items are enabled, the system will restart the power-saving
timeout counters when any activity is detected on any of the drives or
devices on the primary or secondary IDE channels.
Ø
The choice: Disabled or Enabled.
FDD,COM,LPT Port
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the floppy disk drive,
the serial ports, or the parallel port.
Ø
The choice: Disabled or Enabled.
PCI PIRQ[A-D]#
When this item is disabled, any PCI device set as the Master will not
power on the system.
Ø
The choice: Disabled or Enabled.
Delay prior to Thermal
This sets the delay time before the CPU enters auto thermal mode.
Ø
The choice: None, 1/2/4/8/16/32/64Min.
