- 9 -
-
I/O Interface
Provides a variety of I/O interfaces:
Ø
1 x Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format .
Ø
2 x DB9 Serial connectors 16550 UART compatible.
Ø
1 x DB15 VGA connector.
Ø
1 x SPDIF-In port.
Ø
2 x 1394 connectors.
Ø
1 x RJ45 LAN connector.
Ø
1 x PS/2 mouse connector.
Ø
1 x PS/2 Keyboard connector.
Ø
1 x Line-Out (Front-Out) port.
Ø
1 x Line-In port, shared with rear speaker output when multi-channel
audio is enabled.
Ø
1 x Bass/Center-Out port.
-
PCI Bus Master IDE Controller Onboard
Two Ultra DMA 133/100 Bus Master Dual-channel IDE ports provide support
to a maximum of four IDE devices (one Master and one Slave per channel).
The IDE Bus implements data transfer speeds of up to 133/100 MB/sec and
also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
-
ATX Power Supply Connector
ATX power supply unit can be connected to the onboard 20-pin Pentium 4
standard ATX power connectors, supporting Suspend and Soft-On/Off by
dual-function power button.
The Pentium 4 ATX power include other 4-pin +12V ATX power connector.
-
Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4
(Suspend to DISK), and S5 (Soft-Off). ACPI provides more efficient Energy
Saving Features controlled by your operating system that supports OS Direct
Power Management (OSPM) functionality.
