- 55 -
RAS# to CAS# delay (tRCD)
This field lets you insert a timing delay between the CAS and RAS
strobesignals, and you can use it when DRAM is written to , read from,
or refreshed. Faster performance is gained in high speed, more stable
performance, in low speed..
Ø
The Choice: Auto, 2 Bus Clocks, 3 Bus Clocks, 4 Bus Clocks,
5 Bus Clocks, 6 Bus Clocks or 7 Bus Clocks.
Min RAS# active time (tRAS)
Places an artificial memory clock limit on the system.
Memory is prevented from running faster than this frequency.
Ø
The Choice: Auto, 5 ~15 Bus Clocks.
Row precharge Time (tRP)
This field specifies the Row precharge Time. Precharge to Active or
Auto-Refresh of the same bank. Typically 20-24 nsec.
Ø
The Choice: Auto, 2 ~6 Bus Clocks.
CPU OverClock in MHz
This item selects the CPU OverClock in MHz.
Ø
The choice: 200~280.
AGP OverClock in MHz
This item selects the AGP OverClock in MHz.
Ø
The choice: 66~100.
AGP Aperture Size(MB)
Select the size of Accelerated Graphics Port(AGP) aperture.
The aperture is a portion of the PCI memory address range dedicated to
graphics memory address space. Host cycles that hit the aperture range
are forwarded to the AGP without any translaton.
Ø
The choice: 32M, 64M, 128M, 256M or 512M.
AGP 3.0 Speed
This item allows you to set the AGP 3.0 Speed. (With AGP 8x card)
Ø
The Choice: Always Auto.
AGP 2.0 Speed
This item allows you to set the AGP 2.0 Speed. (Without AGP 8x card)
Ø
The Choice: Auto, 1x, 1x2x or 1x2x4x.
AGP Fast Write
This item allows you to set the AGP Fast Write.
Ø
The Choice: Auto or Disabled.
