manualshive.com logo in svg

Shuttle FN45U, Руководство пользователя


Поделиться
Скачать
background image

M912

Shuttle

®

 FN45U

AMD Sempron/Athlon XP/Athlon/Duron
462-pin Processor
Based DDR Mainboard
Manual Version 1.0

Copyright

Copyright

©

 2004 by Shuttle

®

 Inc. All Rights Reserved.

This publication, including all photos, illustrations, and software, is protected under interna-
tional copyright laws, with all rights reserved. Reproducing any of the material contained
herein is prohibited without the consent of the publisher.

Disclaimer

Shuttle

®

 Inc. shall not be liable for any incidental or consequential damages resulting from the

performance or use of this product.

This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents.  In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.  The information contained in this manual is provided for
general use by the customers.

Trademarks

Shuttle is a registered trademark of Shuttle Inc.

nVIDIA is a registered trademark of nVIDIA Corporation.

AMD, Athlon and Duron are registered trademarks of AMD Corporation.

PS/2 is a registered trademark of IBM Corporation.

AWARD is a registered trademark of Award Software Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice:

 Other product names used in this manual are ascribed to their respective

owners and acknowledged.

Содержание FN45U










































































Отзывы:

Нет отзывов

Похожие инструкции для FN45U

Intel BOXDH57JG Product Manual preview
BOXDH57JG
Бренд: Intel Страницы: 78
MSI ms-7377 Service Manual preview
ms-7377
Бренд: MSI Страницы: 35
MSI 845 Ultra Manual preview
845 Ultra
Бренд: MSI Страницы: 96
Sun Microsystems Netra CP2500 Programming Manual preview
Netra CP2500
Бренд: Sun Microsystems Страницы: 74
MSI MS-7204 Instruction Manual preview
MS-7204
Бренд: MSI Страницы: 36
EVGA Z97 FTW User Manual preview
Z97 FTW
Бренд: EVGA Страницы: 14
Biostar GF8200 M 2G+ Manual preview
GF8200 M 2G+
Бренд: Biostar Страницы: 37
Gigabyte H470 AORUS PRO AX User Manual preview
H470 AORUS PRO AX
Бренд: Gigabyte Страницы: 52
J&W JW-A880GMT-EXTREME User Manual preview
JW-A880GMT-EXTREME
Бренд: J&W Страницы: 39
Maxtang BW-35 User Manual preview
BW-35
Бренд: Maxtang Страницы: 13
Gigabyte GA-F2A68HM-DS2 User Manual preview
GA-F2A68HM-DS2
Бренд: Gigabyte Страницы: 36
MSI z170a GAMING M9 ACK User Manual preview
z170a GAMING M9 ACK
Бренд: MSI Страницы: 109
Intel Q67 User Manual preview
Q67
Бренд: Intel Страницы: 36
ASROCK A75M Quick Installation Manual preview
A75M
Бренд: ASROCK Страницы: 234
SOYO SY-K7AIA User Manual preview
SY-K7AIA
Бренд: SOYO Страницы: 88
ASROCK FM2A88X Pro User Manual preview
FM2A88X Pro
Бренд: ASROCK Страницы: 66
Texas Instruments TSB42AA9 (StorageLynx) EVM User Manual preview
TSB42AA9 (StorageLynx) EVM
Бренд: Texas Instruments Страницы: 32
I-Bus IBC 2600 User Manual preview
IBC 2600
Бренд: I-Bus Страницы: 140

Бренды по названию

Популярные бренды

Загрузить еще бренды