background image

- 61 -

Power-On by Alarm

When set to Enabled, the following three fields become available and
you can set the date, hour, and minute to turn on your system.

Ø

 The choice: Enabled or Disabled.

Day (dd) of Alarm
This item selects the alarm Time.
[dd]

Ø

Key in a DEC number: Min=1, Max=31.

Time(hh : mm : ss) of Alarm
This item selects the alarm Time.
[hh]

Ø

Key in a DEC number: Min=0, Max=23.

[mm]

Ø

Key in a DEC number: Min=0, Max=59.

[ss]

Ø

Key in a DEC number: Min=0, Max=59.

PS2 Keyboard Power ON

Set a password or a key to awaken the system from a keyboard.

Ø

The choice: Disabled, Password, or Hot KEY.

KB Power ON Password

Press <Enter> to set a password to awaken the system from a key-
board.

Hot Key Power ON

Set a key to awaken the system from a keyboard.

Ø

The choice: Any Key or Ctrl-F1~F12.

PS2 Mouse Power ON

Enable or disable the function of awakening the system from a mouse.

Ø

The choice: Enabled or Disabled.

PWRON After PWR-Fail

This item defines your computer to shut off, automatically restart, or
return to its last operating status after power fails.

Ø

The choice: Off, On, or Former-Sts.

Содержание FN41U










































































Отзывы: