manualshive.com logo in svg

Shuttle FB62, Руководство пользователя


Поделиться
Скачать
background image

- 65 -

Serial ATA Port0/Port1 Mode

Ø

The choice: Primary Master, Primary Slave, Secondary Master,

     Secondary Slave, Primary Master, Secondary Master, SATA0
     Master, SATA1 Master.

Onboard Device

Option are in its sub-menu.
Press<Enter>to enter the sub-menu of detailed options.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) port
on this mainboard.

Ø

The choice: Enabled or Disabled.

USB 2.0 Controller
Select Enabled if your system contains a Universal Serial Bus (USB) 2.0
controller and you have USB peripherals.

Ø

The choice: Enabled or Disabled.

USB Keyboard Support
Select Enabled if you plan to use a keyboard connected through the
USB port in a legacy operating system ( such as DOS ) that doesn't
support Plug and Play.

Ø

The choice: Enabled or Disabled.

AC97 Audio
This item allows you to select AC 97 audio chip to support Audio.
Disable this item If you are going to install a PCI audio add-on card.

Ø

The Choice: Auto or Disabled.

Intel 82562 Lan
Enabled / Disabled onboard Intel 82562 Lan device.

Ø

The choice: Enabled, or Disabled.

SuperIO Device

Option are in its sub-menu.
Press<Enter>to enter the sub-menu of detailed options.
Onboard FDC Controller
This item specifices onboard floppy disk drive controller.  This setting
allows you to connect your floppy disk drives to the onboard floppy
connector.

Ø

The choice: Enabled Disabled.

Onboard Serial Port1

This option is used to assign the I/O address and interrupt request ( IRQ
) for the onboard serial port1 ( COM1 ).

Содержание FB62



















































































Отзывы:

Нет отзывов

Похожие инструкции для FB62

QDI P2S Manual preview
P2S
Бренд: QDI Страницы: 69
EPOX LXR Instructions Manual preview
LXR
Бренд: EPOX Страницы: 9
ASROCK 775V88 Installation Manual preview
775V88
Бренд: ASROCK Страницы: 114
Biostar U8788 Reports Manual preview
U8788
Бренд: Biostar Страницы: 51
JETWAY MF13 Technical Manual preview
MF13
Бренд: JETWAY Страницы: 49
Colorful A320M-K PRO V14 User Manual preview
A320M-K PRO V14
Бренд: Colorful Страницы: 12
Fujitsu Siemens Computers D1421 Technical Manual preview
D1421
Бренд: Fujitsu Siemens Computers Страницы: 20
ITOX G4M300-M12 User Manual preview
G4M300-M12
Бренд: ITOX Страницы: 114
Caji PROM8908 Operation Manuals preview
PROM8908
Бренд: Caji Страницы: 19
NXP Semiconductors FRDMDUALK3664EVB User Manual preview
FRDMDUALK3664EVB
Бренд: NXP Semiconductors Страницы: 17
Lattice DisplayPort VIP Input Board User Manual preview
DisplayPort VIP Input Board
Бренд: Lattice Страницы: 21
Analog Devices AD9789-EBZ Quick Start Manual preview
AD9789-EBZ
Бренд: Analog Devices Страницы: 8
DFI CR100-CRM User Manual preview
CR100-CRM
Бренд: DFI Страницы: 177
Aaeon GENE-9455 Rev.B Manual preview
GENE-9455 Rev.B
Бренд: Aaeon Страницы: 64
XFX nForce 680i LT SLI User Manual preview
nForce 680i LT SLI
Бренд: XFX Страницы: 137
trimond IN440 Micro-ATX User Manual preview
IN440 Micro-ATX
Бренд: trimond Страницы: 47
Gigabyte 686LX3 User Manual preview
686LX3
Бренд: Gigabyte Страницы: 20
ASROCK H570M-ITX/ac User Manual preview
H570M-ITX/ac
Бренд: ASROCK Страницы: 92

Бренды по названию

Популярные бренды

Загрузить еще бренды