manualshive.com logo in svg

Shuttle AK38, Руководство пользователя

Поделиться
Скачать
Shuttle AK38 Скачать руководство пользователя страница 67

- 64 -

F

Integrated Peripherals

VIA OnChip IDE Device

Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.

OnChip IDE Channel0
The chipset contains a PCI IDE interface with support to two IDE chan-
nels. Select Enabled to activate the primary IDE interface;  select
Disabled to deactivate this interface

Ø

The choice: Enabled or Disabled.

OnChip IDE Channel1
The chipset contains a PCI IDE interface with support to two IDE chan-
nels. Select Enabled to activate the secondary IDE interface;  select
Disabled to deactivate this interface.

Ø

The choice: Enabled or Disabled.

IDE Prefetch Mode
The onboard IDE drive interfaces support IDE prefetching for faster
drive access. If you install a primary and/or secondary add-on IDE
interface, set this field to Disabled if the interface does not support
prefetching.

Ø

The choice: Enabled or Disabled.

Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO
mode (0-4) for each of the four IDE devices that the onboard IDE inter-
face supports. Modes 0 through 4 provide successively increased
performance. In Auto mode, the system automatically determines the
best mode for each device.

Ø

The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4.

Содержание AK38


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды