Shuttle AK32E Скачать руководство пользователя

Страница: 14 / 81

- 10 -

System BIOS

Provides licensed Award BIOS V6.0 PG on 2Mb Flash EEPROM and
supports Green PC, Desktop Management Interface (DMI).

ATX Form Factor

System board conforms to the ATX specification.
Board dimension: 305mm* 244mm.

Advanced Features

Dual Function Power Button - The system can be in one of two states;
one is Suspend mode and the other is Soft-Off mode. Pushing the

power button for less than 4 seconds places the system into Suspend

mode. When the power button is pressed for longer than 4 seconds, the
system enters the Soft-Off mode.

Wake-on-LAN (WOL) - The onboard WOL connector can be attached
to a network card that supports this function to wake up the system via
LAN.

Modem Ring Power-On - The system can be powered on automatically
by the activation of modem ring.

CPU Clock Setting- This item allows users to adjust CPU Host Clock in BIOS.

CPU Ratio Setting- This item allows users to adjust CPU Ratio in BIOS.

CPU Vcore Setting- This item allows users to adjust CPU Vcore in BIOS.

Intelligent Features

Voltage Monitoring - Monitors various voltages of key elements, such as
the CPU, and other critical system voltage levels to ensure stable current
passing through mainboard components. System voltages i3.3VIN,
+5V, +12V, -12V, -5V on system etc.

Fan Status Monitoring - To prevent CPU from overheating, the CPU fan is
monitored for RPM and failure. (CPU Cooling FAN with RPM sensor is
required.)

Temperature Monitoring - This item allows users to make sure whether
the CPU or system runs in a suitable temperature.

Содержание AK32E


















































































Результаты поиска

Содержание AK32E

Отзывы:

Похожие инструкции для AK32E

Бренды по названию

Популярные бренды

Shuttle AK32E, Руководство пользователя

Результаты поиска

Содержание AK32E

Отзывы:

Похожие инструкции для AK32E

Бренды по названию

Популярные бренды