- 33 -
3.3 System Memory Configuration
The AI61 mainboard has three 168-pin DIMM sockets that allow you to
install from 16MB up to 768MB of system memory with SDRAM (Synchro-
nous DRAM). Each DIMM (Dual In-line Memory Module) socket can
accommodate 16MB, 32MB, 64MB, 128MB, and 256MB 3.3V single or
double side SDRAM modules. DIMM sockets are arranged in two banks,
each memory bank made of one socket and providing a 64 bit wide data
path.
Install Memory:
Install memory in any or all of the banks and in any combination, as follows.
Note:
You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional SDRAM
modules in available DIMM banks. The total system memory is calculated
by simply adding up the memory in all DIMM banks. After upgrade, the
new system memory value will automatically be computed and displayed
by the BIOS Standard CMOS Setup menu.
DIMM
Socket
Memory Modules
Module
Quantity
DIMM 1
16MB, 32MB, 64MB, 128MB, 256MB 168-pin
3.3V SDRAM DIMM
x 1
DIMM 2
16MB, 32MB, 64MB, 128MB, 256MB 168-pin
3.3V SDRAM DIMM
x 1
DIMM 3
16MB, 32MB, 64MB, 128MB, 256MB 168-pin
3.3V SDRAM DIMM
x 1
