Shure ULXD6-8, Руководство пользователя

Страница: 14 / 23

Shure Incorporated
14/23
4.
1.
2.
3.
4.
5.
•
•
•
1.
2.
Sync the transmitter and receiver to send the settings to the transmitter.
Receiver Front Panel
Required equipment: Receiver and transmitter
Use receiver front panel and control wheel to change transmitter settings. See receiver user guide for detailed menu
structure.
Press enter on receiver to save changes.
Press sync.
Align the receiver and transmitter IR windows until the receiver IR window illuminates red.
When complete, SYNC SUCCESS! appears.
Note: If using a QLX-D receiver, you must use Wireless Workbench to make changes to transmitter settings.
Using QLX-D with a Shure ULX-D System
Transmitters and receivers from QLX-D and ULX-D component groups can be paired to form audio channels.
To ensure functionality, use the following settings on receivers and transmitters:
Encryption set to Off
High Density Mode set to Off (ULX-D receiver)
Manually tune the receiver and transmitter to the same frequency.
Note : IR sync between QLX-D and ULXD6/8 transmitters is possible provided you are operating on firmware version 2.1.16 or newer.
To create an audio channel, manually set the receiver frequency to match the frequency of the transmitter.
If using ULXD6 or ULXD8 transmitters with a QLX­D receiver, you can only make changes to transmitter presets using Wire­
less Workbench.
Open receiver properties in WWB.
Make changes to transmitter presets and click Apply. The new settings will be sent to the QLX-D receiver.