Shure ULXD4D, Руководство пользователя

Страница: 47 / 63

Shure Incorporated
47/63
4.
5.
1.
2.
3.
•
•
1.
2.
3.
4.
5.
•
•
Connect the receiver and computer to the same network.
From the Update Devices tab, download the latest firmware to the receiver.
For more information on the Shure Update Utility, visit the Shure Update Utility user guide .
Updating the Transmitter
To upload the firmware to the transmitter, go to
DEVICE UTILITIES
>
TX FW UPDATE
on the receiver.
Place the transmitter on its side and align the IR ports.
Press ENTER on the receiver to begin the download to the transmitter. IR ports must be aligned for the entire down­
load, which can take 50 seconds or longer.
Connecting to an External Control System
The ULX-D receiver is compatible with external control systems such as AMX or Crestron via the Ethernet, using on the same
cables used to carry Shure Control (WWB6). Use only one controller per system to avoid messaging conflicts.
Connection: Ethernet (TCP/IP; ULX-D receiver is the client)
Port: 2202
For a comprehensive list of ULX-D command strings, visit: https://d24z4d3zypmncx.cloudfront.net/Pubs/ulx/ulx-d-network-
string-commands.pdf
Setting the Gateway to Allow Cross Subnet Routing
ULX-D receivers include gateway addressing to support cross-subnet routing. The gateway setting allows a single controller to
manage devices assigned to different subnets such as multiple rooms or multiple buildings.
Note: A gateway address is an advanced network setting. In most network configurations, the setting does not need to be changed.
To set the receiver gateway:
From the receiver menu:
DEVICE UTILITIES
>
NETWORK
>
SHURE CONTROL
>
NETWORK
Press and turn the control wheel to set the Mode to Manual.
Press the control wheel to navigate to the first digit of the GW (gateway) setting.
Turn the control wheel to change a value, press the control wheel to advance to the next octet.
When finished, press ENTER to save.
Note: When setting the gateway address, the IP address and Subnet must be set to valid addresses.
Managing Your System with Shure Software
Wireless Workbench
Manage every facet of wireless system performance, from pre­show planning to live channel monitoring, with Wireless Work­
bench.
Visit the Wireless Workbench page to download Workbench.
Visit the Workbench help page to learn how to use Workbench with your system.
®