Shure Incorporated
46/63
1.
2.
3.
1.
2.
3.
1.
2.
3.
Restoring the Dante Network Card Factory Settings
The
Factory Reset
option within the Dante controller restores the Dante card to the factory settings and configures the Dante IP
address mode to AUTO.
From the Dante controller, select a receiver and open the
Network Config
tab.
Click on
Factory Reset
.
Allow the Dante controller to refresh before making any additional changes.
System Reset
System Reset clears the current receiver settings and restores the factory default settings.
To restore factory default settings:
Go to
DEVICE
UTILITIES
>
SYSTEM
RESET
>
RESTORE
.
Scroll to the
DEFAULT SETTINGS
option and press ENTER.
Press the flashing ENTER button to return the receiver to the default settings.
Firmware
Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are devel
oped to incorporate additional features and enhancements. To take advantage of design improvements, new versions of the
firmware can be uploaded and installed using the Shure Update Utility tool available in Shure's Wireless Workbench software.
Software is available for download from
Firmware Versioning
When updating receiver firmware, update transmitters to the same firmware version to ensure consistent operation.
The firmware of all ULX-D devices has the form of MAJOR.MINOR.PATCH (e.g., 1.2.14). At a minimum, all ULX-D devices on
the network (including transmitters), must have the same MAJOR and MINOR firmware version numbers (e.g., 1.2.x).
Updating the Receiver
CAUTION!
Ensure that receiver power and network connections are maintained during a firmware update. Do not turn off the
receiver until the update is complete.
Once the download is complete, the receiver automatically begins the firmware update, which overwrites the existing firmware.
From Shure Wireless Workbench software, open the Shure Update Utility:
Tools
>
Shure
Update
Utility
.
Click the update button (for example,
5 Updates Available
) to view new firmware versions available to download.
Select the updates and click Download. The new downloads are added to the Firmware tab, making them available to
install on the device hardware.
®
