Shure UA864, Руководство пользователя

Страница: 3 / 10

Shure Incorporated
3/10
Required Equipment
• #8 or #6 screws
• Flat washers
• Lock washers
• Drill
• Screwdriver
Installation Steps
1. Align the mounting plate:
Junction box mounting: Align the mounting plate with the junction box so that at least two screws can be
used.
Wall mounting: Use the mounting plate as a template to mark the location for the holes on the mounting sur-
face. Drill the holes accordingly.
2. Secure the mounting plate to the surface with the washers as shown (CAUTION: Do not over-tighten screws).
3. If running RF cable from inside the wall, guide it through the opening in the mounting plate and connect the ca-
ble to the antenna output.
4. Position the antenna mounting posts over the keyhole slots in the mounting plate and slide it into the locked
position.
Mounting to a wall or ceiling
Mounting to an electrical junction box