Shure SLX2, Руководство по обслуживанию

Страница: 26 / 35

26
25A1090 (Rev.3)
PRODUCT SPECIFICATIONS
MECHANICAL
Overall Dimensions
64 mm x 109 mm x 19 mm (2.50 x 4.30 x 0.75 in.)
Weight
73 grams (2.6 oz), without batteries
Housing
Molded ABS case and battery cover
GENERAL
Frequency Range and Transmitter Output Level
NOTE: This Radio apparatus may be capable of operating on some frequencies not autho-
rized in your region. Please contact your national authority to obtain information on authorized
frequencies for wireless microphone products in your region.
Operating Range Under Typical Conditions
100m (300 ft.)
Note: actual range depends on RF signal absorption, reflection, and interference
Audio Frequency Response (+/– 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
Total Harmonic Distortion (ref. +/– 38 kHz deviation, 1 kHz tone)
0.5%, typical
Signal-to-Noise Ratio
>100 dB A-weighted
Operating Temperature Range
–18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302
phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output)
and the tip of the high impedance 1/4-inch output.
Gain Adjustment Range
25 dB
Audio Input Level
-5 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Input Impedence
1 M
Ω
Band Range Transmitter output
H5 518–542 MHz 30 mW/15 dBm
J3 572–596 MHz 30 mW/15 dBm
L4 638–662 MHz 30 mW/15 dBm
P4 702–726 MHz 30 mW/15 dBm
R5 800–820 MHz 20 mW/13 dBm
S6 838–865 MHz 10 mW/10 dBm
JB 806–810 MHz 10 mW/10 dBm
Q4 740–752 MHz 10 mW/10 dBm