Shure SBC840M, Руководство пользователя

Страница: 12 / 15

Shure Incorporated
12/15
•
•
1.
2.
3.
Firmware
Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are devel­
oped to incorporate additional features and enhancements. To take advantage of design improvements, new versions of the
firmware can be downloaded and installed using the Shure Update Utility tool.
Software is available for download from http://www.shure.com/update-utility .
Connecting to an External Control System
The SBC840M networked charging station connects to external control systems such as AMX or Crestron via the Ethernet. For
a comprehensive list of command strings, visit the product page at https://www.shure.com .
Connection: Ethernet (TCP/IP; SBC840M is the client)
Port: 2202
Power Save Mode
Use power save mode to charge batteries with the charger’s network functionality off.
Disconnect the power cable from the AC power outlet.
Press and hold storage while reconnecting to the AC power outlet.
When the charge status and error LEDs flash amber, release the button.
Note: The charger will power off 30 minutes after it finishes charging batteries. Press reset or storage to turn it on.
Vertical Mounting
Three mounting points on the bottom of the charger fit #6 round or pan head screws. Mount to a hard surface using 3 screws
that are long enough to secure the charger. To mount, orient the charger so that the 2 mounting points are on top as shown.