Shure MXA-MUTE, Руководство пользователя

Страница: 14 / 17

Shure Incorporated
14/17
•
•
•
•
•
•
•
•
•
•
One or more microphones connected to separate DSP (P300, IntelliMix Room, or ANIUSB-MATRIX): Link the
mute buttons to the DSP.
Microphone connected to third-party DSP: If using the microphone's IntelliMix output, link the mute button to the mi­
crophone. If using the microphone's direct outputs, use third-party command strings to set up muting.
Compatible Devices
You can link the mute button to the following devices to control muting:
MXA310
MXA710
MXA910
ANIUSB-MATRIX (Also mutes supported soft codecs connected by USB)
IntelliMix P300 (Also mutes supported soft codecs connected by USB)
IntelliMix Room
Using a Third-Party Control System
This device sends and receives logic commands over the network. Many parameters controlled through Designer can be con­
trolled using a third-party control system, using the appropriate command string.
Common applications:
Mute
LED color and behavior
Loading presets
Adjusting levels
A complete list of command strings is available at:
pubs.shure.com/command-strings/MXA-MUTE .
Specifications
Connector Type
RJ45 , 8-pin power cable
Cable Requirements
Cat 5e or higher (shielded cable recommended)