6
Shure Incorporated
8.
Before any update is performed the ‘Error
Status’ has to be checked.
The error in the communication from the units
to the CCU can be checked clicking ‘View/View
Error status Window’
Basically this window shall show no errors in
the system. However in large systems, there
might be generated some errors during start-up.
The error counter can be reset by clicking
‘Reset error counters in CU’. If a counter is
counting up, it is a clear indication, that there
are communication errors.
IMPORTANT: DON’T DO ANY UPDATE IF
THERE ARE ERRORS IN THE
COMMUNICATION.
If units are to be checked click the ‘Switch to
Operation Mode’ and then perform an AIB,
Automatic In-bus test.
The result must be ‘OK’ for all units.
If errors are present or for more test options,
please refer to the section ‘DCS-LAN
Communication’.