manualshive.com logo in svg

Shure LX Wireless System, Руководство пользователя, Страница: 13 / 23

Поделиться
Скачать
Shure LX Wireless System Скачать руководство пользователя страница 13

LX Wireless

13

TRANSMITTER SETUP

LX1 Body-Pack Transmitter Battery Installation (Figure 9)

1. With the transmitter POWER PWR/OFF switch in the OFF position, press down on the

OPEN side of the battery compartment cover, slide it back and flip it open.

2. Insert a new 9V alkaline battery in the compartment (DURACELL MN1604 recom-

mended). Observe proper battery polarity (“+/–”).

-+

FIGURE 9

LX1 BODY–PACK TRANSMITTER BATTERY INSTALLATION

IMPORTANT: A fresh 9V alkaline battery should provide 18 to 20 hours of
operation. However, an 8.4V nickel-cadmium (nicad)battery will only pro-
vide 3 hours of operation. Carbon-zinc and zinc-chloride batteries will not
provide sufficient power, and are not recommended.

LX2 Hand-Held Microphone-Transmitter Battery Installation (Figure 10)

1. With the transmitter PWR/OFF switch in the OFF position, hold the upper part of the

transmitter and unscrew the battery cover.

2. Install a fresh 9V alkaline battery (DURACELL MN1604 recommended). Make sure

the battery terminals match the terminals in the transmitter.

3. Screw the battery cover back into place.

LX2 MICROPHONE-TRANSMITTER BATTERY INSTALLATION

FIGURE 10

Содержание LX Wireless System
























Отзывы:

Нет отзывов