Shure Incorporated
25/34
•
•
•
Issue
Indicator Status
Solution
Transmitter information does not appear on
the Receiver LCD
N/A
Linked transmitter is off or the receiver is not
linked to a transmitter.
Transmitter powers off after 1 hour
Transmitter status LED
off
GLX-D transmitters automatically power-off
after 1 hour to conserve battery life if the sig
nal from a linked receiver is not detected.
Make sure that linked receiver is turned on.
Model
A
B
C
SM58
51 mm, 2.0 in.
252 mm, 9.9 in.
37 mm, 1.5 in.
BETA 58
51 mm, 2.0 in.
252 mm, 9.9 in.
37 mm, 1.5 in.
SM86
49 mm, 1.9 in.
252 mm, 9.9 in.
37 mm, 1.5 in.
BETA 87A
51 mm, 2.0 in.
252 mm, 9.9 in.
37 mm, 1.5 in.
Resetting Components
Use the reset function if it is necessary to restore the transmitter or receiver to their factory settings.
Resetting the Receiver
Restores the receiver to the following factory settings:
Gain level = default
Controls = unlocked
Press and hold the link button while turning on the receiver power until the LCD displays RE.
Note:
When reset is complete, the receiver will automatically initiate linking to search for a transmitter. Press and hold the transmitter link button within five
seconds of powering-on to complete the link.
Resetting the Transmitter
Restores the transmitter to the following factory settings:
Controls = unlocked
Press and hold the transmitter link button while turning on the transmitter until power LED goes off.
When the link button is released, the transmitter will automatically initiate linking to find an available receiver. Press the link but
ton on an available receiver to relink.
Specifications
Tuning Bandwidth
2400
–
2483.5
MHz