③ Power Switch
Turns the transmitter on/off.
④ TA4M Input Jack
Connects to a 4-Pin mini connector (TA4F) microphone or instrument cable.
⑤ Micro USB Charging Port
Connect to USB battery charger.
⑥ Link Button
•
Press and hold within 5 seconds of power-on to manually link with receiver
•
Press momentarily to activate Remote ID function
⑦ Battery Compartment
Holds 1 Shure rechargeable battery.
⑧ Microphone Cartridge
GLXD-2 transmitter models are available with the following cartridge types:
SM58, Beta 58, SM86, Beta 87A.
1
1
2
3
2
3
4
5
6
5
6
7
7
8
off on
GLXD2
on
Transmitter Status LED
LED is green during normal operation.
LED color or flashing indicates a change in transmitter status as shown in
the following table:
Status
State
Color
transmitter attempting relink with receiver
Flashing (slow)
Green
unlinked transmitter searching for receiver
Flashing (fast)
indicates locked transmitter when power
switch is pressed
Flashes 3
times
battery life < 1 hour
On
Red
battery life < 30 minutes
Flashing
remote ID active
Flashing
Red/Green
battery error, replace battery
Flashing
Amber
Wearing the Bodypack Transmitter
Clip the transmitter to a belt or slide a guitar strap through the transmitter clip
as shown.
For best results, the belt should be pressed against the base of the clip.
Wearing the Headworn Microphone
•
Position the headworn microphone 13 mm (1/2 in.) from the corner of
your mouth.
•
Position lavalier and headworn microphones so that clothing, jewelry, or
other items do not bump or rub against the microphone.
13 mm
(.5 in.)
Correct Microphone Placement
•
Hold the microphone within 12 inches from the sound source.
•
For a warmer sound with increased bass presence, move the microphone
closer to the sound source.
•
Do not cover grille with hand.
Shure Incorporated
GLXD4R
Half-Rack Wireless Receiver
7/20
2017/11/28