manualshive.com logo in svg

Shure ANIUSB-Matrix, Руководство пользователя, Страница: 33 / 39

Поделиться
Скачать
Shure ANIUSB-Matrix Скачать руководство пользователя страница 33

9/12/17, 8)20 AM

Shure Publications | User Guides | ANIUSB-Matrix

Page 33 of 39

http://pubs.shure.com/guide/ANIUSB-Matrix/en-US

Verify that input/output channels are
not muted
Check that fader levels are not set too
low
Make sure there is not an encryption
error -- a passphrase mismatch or
encryption only enabled on one device
disrupts audio.

Cannot route Dante audio channels

Install latest version of Dante Controller
from Audinate

®

, available at

www.audinate.com.

Hardware does not power on

The network switch must supply Power
over Ethernet. Otherwise, a PoE
injector must be used
Check network cables and connections

Event Log

The event log provides a detailed account of activity from the moment the device is
powered on. The log collects up to 1,000 activity entries and time-stamps them relative to
the last power cycle. The entries are stored in the internal memory, and are not cleared
when the device is power-cycled. The Export feature creates a CSV (comma separated
values) document to save and sort the log data.

Refer to the log file for details when troubleshooting or consulting with Shure Systems
Support.

To view the event log:

1.  Open the Help menu
2.  Select View Event Log

Severity Level

Information

An action or event has been successfully completed

Warning

An action cannot be complete, but overall functionality is stable

Error

A problem has occurred that could inhibit functionality.

Log Details

Description

Provides details on events and errors, including IP address and
subnet mask.

Time Stamp

Power cycles:days:hours:minutes:seconds since most recent boot-
up.

Event ID

Indicates event type for internal reference.

Tip: Use the filter to narrow down results. Select a category heading to sort the log.

Содержание ANIUSB-Matrix








































Отзывы:

Нет отзывов