SHUR-DRI SD-108, Руководство по установке

Страница: 5 / 16

Troubleshooting / Repair Parts 5
For parts or assistance, call Shur-Dri Customer Service at
1-800-535-4950
10
1
2
3
4A
5
6
4B
7
8
9
11
12
13
14A
14B
15
37 8 9 1000 GE N
FLO W
Key Part
No. Description Qty. SD-108
1 Screw, Cover 4 670-656
2 Cover Plate 1 230-298
3 O-Ring 1 546-023
4A Outer Wearplate 1 721-122
4B Inner Wearplate 1 721-122
5 Impeller 1 416-011
6 Cam Ring 1 134-007
7 Seal, U-Cup 1 16FA019-4
8 Washer 1 854-341
9 Housing Body 1 404-114-B
10 Screw 2 670-657
11 Water Slinger 1 RP0001616
12 Motor 1 *
13 Cord Set 1 992-695
14A Fuse Holder 1 U17-1148
14B Fuse 1 344-001
15 Pud-L-Scoop
®
1 992-653
REPAIR PARTS LIST
• Not illustrated.
* If the motor fails, replace the pump.
TROUBLESHOOTING
SYMPTOM PROBABLE CAUSE(S) CORRECTIVE ACTION
Pump will not prime There are leaks in the Be certain all connections are air tight. Test the connections
suction line by putting soap suds on them. If there is a leak, the soap
suds will be sucked into the loose fittings.
Water being pumped is more Move the pump closer to the water being pumped.
than 10 feet below the pump
Pump will not pump Pump was not properly primed Refer to the steps for priming the pump, included in the
“Installation” section, on Page 3.