4) Click Alarm button a third time to finish alarm time setting;
5) Alarm bell rings 3 minutes before automatic switch-off while no
any operation.
6) Touch any button to enter Sleepy Mode when bell rings. Bell will
rings for 3 more times after 5 minutes. The indicator flashes and
Alarm button is out of function during the Sleepy Mode. If time
setting is needed, please long press “+” to stop alarm 1 or long press
“-” to stop alarm 2. All buttons will function normally;
7) The brightness of the clock light can be manually adjusted to four
grades (dark, low light, sub-bright, high-brightness): "+" and "-" to
manually adjust the light brightness of the digital display, the default
is the brightest state after plugging in, each time you click " -
"Decrease the brightness one stop at a time and turn off the clock
display light one last time.
8) Time display brightness can also be adjusted manually to 3
grades (Min/Mid/Max). “+” and “-” can be used to adjust display
brightness manually. The default grade is max brightness when
power is connected. Single click “-” to dark the display one grade.
5.Night Light Setting:
1) Night light can be set into 9 color modes: white, RGB shade, red,
yellow, light green, green, light blue, blue and pink;
2) Touch the Light button once to turn on the night light with white
color. Another touch shall allow you to set another color in turn as
specified in 5. 1). The last touch will turn off atmosphere light.
6.Eco-power function:
1) Button cell inside is only for time keeping.
2) All functions are out during power disconnection. Functions
restored when power is connected.
D.Note
1.Attention:
In order to function alarm, wireless charging, night light
and USB output all together, power shall be connected by a QC2.0
or QC3.0 adapters. If connected by a 5V adapter, only wireless
charging and alarm can work together.
