4
Battery Charging
This device is equipped with a built-in lithium battery. Please fully charge the
battery before using the device for the first time. It is recommended to charge at
least ten hours for the first time, and charge normally thereafter.
Only use approved charger (Input: AC110~240V 50/60Hz; Output: DC 5V/2.5A).
The manufacturer or the dealer will not take the responsibility for any battery
explosion or device damage caused by using unapproved charger.
To charge the battery, please connect the power adapter to a power source and
the the “DC 5V” port of the device.
NOTES:
●
The built-in battery is not replaceable by the end user. Please contact the
service provider for the information on battery replacement.
●
You can charge the battery with the AC adaptor or USB cable.
●
When the battery power is lower than 15%, the device will deliver an alert tone
and display the low battery message. The battery icon
also will
turn
blank
. If the battery drains, the device switches off automatically. Please
charge the device.
●
If the battery is fully drained, which the device can’t be turned on, please
connect the AC adaptor and charge the device for a while before you turn on
the device.
●
You can use the device while charging, but the charging time will be extended.
●
While charging, the touch screen may be invalid because the battery voltage
isn’t stable.
In this case, please disconnect the power adapter.
●
It is normal that the temperature of the device rises while charging.
●
When the battery is fully charged
(the battery icon stops scrolling and the
LED goes off), please disconnect the power adapter.
●
The charging requires about 6 hours when the devices is off.
Содержание PA0906
Страница 9: ...9 ...
Страница 23: ...23 16 About tablet To check the software version status etc ...