7
When you hold the device in a vertical way, the interface will show the contents in
a vertical way too. When horizontal, the interface stands horizontal too. The screen
can turn within two seconds and restore the previous state after refreshing.
2.8 External network cable and flash disk
External network cable
Insert the network cable into the port of Ethernet. Once logged in, the system will
automatically obtain an IP address for network access. Network access can also be
realized through manual setups.
External flash disk:
Insert the flash disk into the USB port. Once it is properly connected, you can save
and copy contents between the device and the PC.
2.9 Network connection
Cable network:
After you insert the network cable into the port designed for Ethernet on the PC, the
icon “ETH” will appear on status bar at the top of the screen. Then the device will
obtain the IP address automatically to access to the network. Network access can
also be realized through manual setups.
Wireless network:
1
．
Move leftward the WI-FI switch at the upper right part of the device to be in the
ON state;
2
．
Select the icon “setup” under the shortcut bar on the desktop;
